UC3875A

UTC适配器产品

DESCRIPTION

The UTC UC3875A is a high performance current mode PWM

controller ideally suited for low standby power. The PWM switching

frequency is programmable externally at normal operation. Low

V DD startup current make the power reliable on startup design and

a large value resistor could be used in the startup circuit to

minimize the standby power. At no load condition, the IC operates

in power-saving mode for lower standby power, decreasing

frequency for Higher conversion efficiency at light load condition.

The UTC UC3875A contains protection with automatic recovery

including OLP (over load protection), OTP (over temperature

protection), OVP (over voltage protection), UVLO (V DD over voltage clamp and under voltage lockout).To protect the

power MOSFET, Gate-drive output is fixed up to 16V max. The UTC UC3875A contains protection OCP

(cycle-by-cycle current limiting).

The internal slope FBensation improves system stability at high PWM duty cycle output. Leading-edge blanking

on current sense input removes the signal glitch, which offering minimal external FBonent count in the design.

Excellent EMI performance is achieved with UTC proprietary frequency hopping technique (ZL201020615247.1)

together with soft driver control. Audio noise is eliminated due to switch frequency more than 20kHz during

operation.

The UTC UC3875A has such applications as: battery charger, power adaptor, set-top box power supplies, ink jet

printers, open-frame SMPS.

FEATURES

* UTC proprietary frequency hopping technology for Improved EMI

performance.

* Power-saving mode for high light-load and standby efficiency

* Dynamic peak current limiting for constant output power

* Built-in synchronized slope FBensation

* OTP,OLP,OVP and V DD clamp for higher security

* Programmable PWM Frequency

* Gate output voltage clamped at 16V

* Low start-up current

* Cycle-by-cycle Current Limiting

* Under voltage lockout (UVLO)

* Few external FBonents required

规格书UC3875A