GD25LD05C

FEATURES

◆ 1M/512K-bit Serial Flash ◆ Fast Program/Erase Speed

 -128K/64K-byte -Page Program time: 1.6ms typical

 -256 bytes per programmable page -Sector Erase time: 150ms typical

 -Block Erase time: 0.5/0.8s typical

◆ Standard, Dual Output -Chip Erase time: 1.5/0.8s typical

 -Standard SPI: SCLK, CS#, SI, SO, WP#

-Dual Output: SCLK, CS#, IO0, O1, WP# ◆ Flexible Architecture

 -Uniform Sector of 4K-byte

◆ Clock Frequency -Uniform Block of 32/64K-byte

 -50MHz for fast read with 30PF load

 -Dual Output Data transfer up to 80Mbits/s ◆ Low Power Consumption

-0.1uA typical stand-by current

◆ Software/Hardware Write Protection -0.1uA typical power down current

 -Write protect all/portion of memory via software

 -Enable/Disable protection with WP# Pin ◆ Single Power Supply Voltage

 -Full voltage range: 1.65~2.0V

◆ Advanced Security Features

-128-bit Unique ID for each device ◆ Package option

 -SOP8 150mil

◆ Minimum 100,000 Program/Erase Cycles -SOP8 208mil

 -TSSOP8 173mil

◆ Data Retention -DIP8 300mil

-20-year data retention typical -USON8 1.5*1.5mm

 -USON8 3*2mm

GENERAL DESCRIPTION

The GD25LD10C/05C (1M/512K-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and 

supports the Dual Output: Serial Clock, Chip Select, Serial Data I/O0 (SI), O1 (SO). The Dual Output data is transferred 

with speed of 80Mbits/s.