型号:GD25LQ80E
品牌:GD
最小包装:
封装:SOP8 150mil SOP8 208mil USON8 3x2mm
数量:
产 品 说 明 | ||||||||
FEATURES ◆ 8M-bit Serial Flash ◆ Fast Program/Erase Speed - 1024K-Byte - Page Program time: 0.4ms typical - 256 Bytes per programmable page - Sector Erase time: 40ms typical - Block Erase time: 0.15s/0.2s typical ◆ Standard, Dual, Quad SPI, QPI - Chip Erase time: 2.2s typical - Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD# - Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD# ◆ Flexible Architecture - Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3 - Uniform Sector of 4K-Byte - QPI: SCLK, CS#, IO0, IO1, IO2, IO3 - Uniform Block of 32/64K-Byte ◆ High Speed Clock Frequency ◆ Low Power Consumption - 133MHz for fast read - 10μA typical standby current - Dual I/O Data transfer up to 266Mbits/s - 1μA typical deep power down current - Quad I/O Data transfer up to 532Mbits/s - QPI Mode Data transfer up to 532Mbits/s ◆ Advanced Security Features - 128-bit Unique ID for each device ◆ Software/Hardware Write Protection - Serial Flash Discoverable parameters (SFDP) register - Write protect all/portion of memory via software - 3x1024-Byte Security Registers With OTP Locks - Enable/Disable protection with WP# Pin - Top/Bottom Block protection ◆ Single Power Supply Voltage - Full voltage range: 1.65-2.0V ◆ Endurance and Data Retention - Minimum 100,000 Program/Erase Cycles ◆ Package Information - 20-year data retention typical - SOP8 150mil - SOP8 208mil ◆ Allows XiP (eXecute In Place) Operation - USON8 (3x2mm, 0.45mm thickness) - High speed Read reduce overall XiP instruction fetch time - WSON8 (6x5mm) - Continuous Read with Wrap further reduce data latency to fill up SoC cache GENERAL DESCRIPTIONS The GD25LQ80E (8M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), I/O3 (HOLD#). The Dual I/O data is transferred with speed of 266Mbit/s, and the Quad I/O data is transferred with speed of 532Mbit/s. |
CATALOGUE