GD25LD80E

FEATURES

◆ 8M-bit Serial Flash 

   - 1024K-Byte

   - 256 Bytes per programmable page

◆ Standard, Dual Output

  - Standard SPI: SCLK, CS#, SI, SO, WP#

  - Dual Output: SCLK, CS#, IO0, IO1, WP# 

◆ High Speed Clock Frequency

  - 50MHz for fast read

  - Dual Output Data transfer up to 100Mbits/s

◆ Software/Hardware Write Protection

  - Write protect all/portion of memory via software

  - Enable/Disable protection with WP# Pin

  - Top/Bottom Block protection

◆ Endurance and Data Retention

  - Minimum 100,000 Program/Erase Cycles

  - 20-year data retention typical

◆ Fast Program/Erase Speed

  - Page Program time: 1.4ms typical

  - Sector Erase time: 120ms typical

  - Block Erase time: 0.4s/0.6s typical

  - Chip Erase time: 8s typical

◆ Flexible Architecture

   - Uniform Sector of 4K-Byte

   - Uniform Block of 32/64K-Byte

◆ Low Power Consumption

  - 0.1μA typical standby current

  - 0.1μA typical deep power down current

◆ Advanced Security Features

  - 128-bit Unique ID for each device

  - 512-Byte Security Registers With OTP Locks

◆ Single Power Supply Voltage

  - Full voltage range: 1.65-2.0V

◆ Package Information

  - USON8 (1.5x1.5mm)

  - USON8 (3x2mm)

  - SOP8 150mil

GENERAL DESCRIPTIONS

The GD25LD80E (8M-bit) Serial flash supports the standard Serial Peripheral 

Interface (SPI), and the Dual Output: Serial Clock, Chip Select, Serial Data I/O0 

(SI) and I/O1 (SO). The Dual Output data is transferred with speed of 100Mbit/s.