GD25WD80E

FEATURES

◆ 8M-bit Serial Flash 

- 1024K-Byte

- 256 Bytes per programmable page

◆ Standard, Dual Output 

- Standard SPI: SCLK, CS#, SI, SO, WP#

 - Dual Output: SCLK, CS#, IO0, IO1, WP# 

◆ High Speed Clock Frequency

- 104MHz for fast read

 - Dual Output Data transfer up to 208Mbits/s 

◆ Software/Hardware Write Protection

 - Write protect all/portion of memory via software

 - Enable/Disable protection with WP# Pin 

- Top/Bottom Block protection

◆ Endurance and Data Retention

 - Minimum 100,000 Program/Erase Cycles

 - 20-year data retention typical

◆ Fast Program/Erase Speed

 - Page Program time: 1.4ms typical

 - Sector Erase time: 120ms typical

 - Block Erase time: 0.4s/0.6s typical

 - Chip Erase time: 8s typical

◆ Flexible Architecture

- Uniform Sector of 4K-Byte

- Uniform Block of 32/64K-Byte

◆ Low Power Consumption

- 0.1μA typical standby current

- 0.1μA typical deep power down current

◆ Advanced Security Features

- 128-bit Unique ID for each device

 - 512-Byte Security Registers With OTP Locks

◆ Single Power Supply Voltage

 - 20-year data retention typical - Full voltage range: 1.65-3.6V

◆ Package Information

 - USON8 (1.5x1.5mm)

 - USON8 (3x2mm)

- SOP8 150mil

GENERAL DESCRIPTIONS

The GD25WD80E (8M-bit) Serial flash supports the standard Serial 

Peripheral Interface (SPI), and the Dual Output: Serial Clock, Chip 

Select, Serial Data I/O0 (SI) and I/O1 (SO). The Dual Output data is 

transferred with speed of 208Mbit/s.