L6132

DESCRIPTION 

The UTC L6132 provides new levels of speed vs power 

performance in applications where low voltage supplies or power 

limitations previously made compromise necessary. With only 350

μA/amp supply current, the 10 MHz gain-bandwidth of this device 

supports new portable applications where higher power devices 

unacceptably drain battery life. 

The UTC L6132 can be driven by voltages that exceed both 

power supply rails, thus eliminating concerns over exceeding the 

common-mode voltage range. The rail-to-rail output swing capability 

provides the maximum possible dynamic range at the output. This is 

particularly important when operating on low supply voltages. The 

UTC L6132 can also drive large capacitive loads without oscillating.

Operating on supplies from 2.7V to over 24V, the UTC L6132 is 

excellent for a very wide range of applications, from battery operated 

systems with large bandwidth requirements to high speed 

instrumentation. 

FEATURES 

* (For 5V Supply, Typ. Unless Noted) 

* Rail-to-rail Input : -0.25V ~ 5.25V 

* Rail-to-Rail Output : 0.01V ~ 4.99V 

* High Gain-Bandwidth, 10 MHz at 20 kHz 

* Slew Ratel 12V/μs 

* Low Supply Current 350 μA/Amplifier 

* Wide Supply Range: 2.7V ~ 24V 

* Gain 100dB with RL=10k 

规格书L6132