GD25WD80C

FEATURES

◆ 8M-bit Serial Flash ◆ Fast Program/Erase Speed

 -1024K-byte -Page Program time: 1.6ms typical

 -256 bytes per programmable page -Sector Erase time: 150ms typical

 -Block Erase time: 0.5/0.8s typical

◆ Standard, Dual Output -Chip Erase time: 12s typical

 -Standard SPI: SCLK, CS#, SI, SO, WP#

-Dual Output: SCLK, CS#, IO0, O1, WP# ◆ Flexible Architecture

 -Uniform Sector of 4K-byte

◆ Clock Frequency -Uniform Block of 32/64k-byte

 -100MHz for fast read on 3.0~3.6V power supply

◆ Dual Output Data Transfer up to 160Mbits/s ◆ Low Power Consumption

 -70MHz for fast read on 2.1~3.0V power supply -0.1uA typical standby current 

◆ Dual Output Data Transfer up to 120Mbits/s -0.1uA typical power down current 

 -50MHz for fast read on 1.65~2.1V power supply

◆ Dual Output Data Transfer up to 80Mbits/s ◆ Advanced Security Features

-128-bit Unique ID for each device

◆ Software/Hardware Write Protection

 -Write protect all/portion of memory via software ◆ Single Power Supply Voltage

 -Enable/Disable protection with WP# Pin -Full voltage range: 1.65~3.6V

◆ Minimum 100,000 Program/Erase Cycles ◆ Package option

 -SOP8 150MIL

◆ Data Retention -SOP8 208MIL

-20-year data retention typical -TSSOP8 173MIL

 -DIP8 300MIL

 -USON8 1.5*1.5MM

-USON8 3*2MM

GENERAL DESCRIPTION

The GD25WD80C (8M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the 

Dual Output: Serial Clock, Chip Select, Serial Data I/O0 (SI), O1 (SO). The Dual Output data is transferred with maximum 

speed of 160Mbits/s.